22
22 | Setting Up the Printer On a Network
4. Click Install.
5. Follow the on-screen instructions to install all the necessary software and
manuals, and place a link to the Epson Professional Imaging Website on
your desktop.
6. When you’re finished, remove the printer software CD-ROM. Then,
follow the instructions below.
Adding the Printer
1. Open the Applications folder, then open the Utilities folder and start
the
Printer Setup Utility.
2. If you see a message like this, click
Add, then skip to step 4.
Note: If you see a
message that the installer
has detected an older
version of EpsonNet
Config on your system,
you must uninstall the
older version before you
can install the new one.
To uninstall, drag the
EpsonNet folder to the
trash.Then reinstall your
printer software.
To Next Page
Loading...
