52
52 | Handling Paper and Other Media
• DRYING TIME
lets you print with non-Epson media and avoid
smearing the ink. You can make the print head wait up to 10
seconds after each pass to allow ink to dry on the page.
• SUCTION lets you decrease the paper suction level when printing
on thin media (under 12 lb), such as drafting paper or backlight film.
• M/W ADJ adjusts the intensity of the MicroWeave
®
pattern. This
improves print quality, but lowers printing speed.
10. When done, press the
pause button.
Selecting Custom Paper Configurations
Once you have created a paper configuration, you can select it whenever you
print on that paper:
1. Press the
Menu button, then press the button to display
CUSTOM PAPER. Press the Menu button again.
2. Press the button to display
PAPER NUMBER, then press the
Menu button.
3. Press the button to select the configuration number that you want to
use. If you select
STANDARD, the printer uses the driver settings. If you
select a number from 1 to 10, the control panel settings override the
driver settings.
4. Press the
Menu button, then press the pause button to exit the
menu.
5. The configuration number you selected is displayed on the LCD.
To Next Page
Loading...
