35
Handling Paper and Other Media | 35
4. Flip up the paper guide roller and slide the edge guide all the way to the
left.
5. Clean the inside of the paper tray to remove any dust. Dust may affect
printout quality.
6. Thumb through a stack of paper, then gently tap it on a flat surface to
even the edges.
7. Load the sheets with the printable side down, in the portrait orientation
(short edge first). Place the paper all the way back in the paper tray and
next to the right edge.
Note: When you need to
add sheets, first remove
all the paper and then add
to the stack that you
removed.
To Next Page
Loading...
