Chapter 2
STARTING
UP
AND
OPERATING
THE
PX-8
The first section
of
this chapter describes how
to
set up your PX-8 for the first
time. The remainder
of
the chapter deals with the general functions
of
the
computer.
2.1 Starting Up
2.1.1 Precautions
a) The computer
The PX-8
is
a precise machine and in order
to
achieve the best performance,
you should observe the following points:
i) Avoid using or leaving the PX-8 in a place exposed to direct sunlight.
ii) Avoid using or leaving the PX-8 in a
damp
place.
iii)
Avoid using
or
leaving the PX-8 in a place exposed to strong vibration.
iv) Avoid using or leaving the PX-8 in a place exposed
to
high temperatures.
v)
Do not allow the PX-8 to be subjected to shocks
of
any kind.
b) The
AC
adapter
An
AC
adapter
is
provided with the PX-8
to
re-charge the built-in batteries.
When using this AC adapter:
i) Avoid plugging the adapter plug into the AC adapter jack
of
the PX-8
without plugging the adapter to an
AC
outlet.
ii) The shape
of
the power plug differs according
to
the country for which
the PX-8 has been shipped. In certain countries there may not be a power
plug attached. Your dealer will be able to advise you on the correct plug
in this case.
iii)
The PX-8 will take approximately 8 hours
to
charge
if
the PX-8
is
switched
off. However,
if
the power switch
is
ON the time will be greater (at least
11
hours
if
no access
is
made to any device including the keyboard).
2-1
•
To Next Page
Loading...
Need help?
General
