Getting Started 13
1
1
1
1
1
1
1
1
1
English
Attaching the Strap to Your Camera
Follow the steps below to attach the strap with the camera.
1. Attach the protective pad and the metal ring to one side of the
camera.
2. Lace the strap end through the holes in the protective pad and the
metal ring.
3. Lace the strap end through the two plastic fasteners.
4. Repeat steps 1 to 3 for the other end of the strap.
Using the Battery
Charging the battery
Your camera comes with a lithium-ion battery (EU-85). Be sure to
charge the battery before using the camera for the first time or after long
periods of disuse. It takes about 3.5 hours to charge the battery when
no charge remains.
Follow the steps below to charge the battery.
To Next Page
Loading...
