26 Taking Pictures
2. Rotate the JOG dial to select the desired white balance (light
source). You can select from Auto, Sunny, Shade, Cloudy,
Incandescent, or Fluorescent.
Note:
You can check the selected white balance setting on the needle indicator.
For details, see “About Indicator Needles” on page 24.
3. Return the Photo quality/WB settings lever to the center position.
Setting ISO Sensitivity
Sensitivity is a measure of how quickly the camera reacts to light. You
can change the light sensitivity for a specific purpose and time
manually or let the camera select it automatically. Follow the steps
below to select ISO sensitivity.
1. Pull up and hold the outside of the shutter speed dial (ISO speed
set ring).
2. Rotate the ISO speed set ring. You can select ISO sensitivity from
200, 400, 800, or 1600.
3. Release the ISO speed set ring.
Note:
If the subject is dark, setting a higher ISO sensitivity allows faster focusing
and less chance of blurring. However, your photos may contain noise (lose
color) or become grainy.
Setting Auto Exposure (Aperture Priority)
When you set the aperture, the most appropriate shutter speed settings
are automatically selected. Follow the steps below to set the aperture
for a photo.
1. Rotate the shutter speed dial to AE.
2. Rotate the aperture ring to select the desired value.
To Next Page
Loading...
Need help?
General
