F
Tap the data item you want to upload
and tap Upload.
G
Hold down D on this product.
Bluetooth communication starts.
Note:
You can also start Bluetooth communication from
the Settings menu on this product. Refer to
"Settings" in the User Manual for details.
H
Tap OK on the smartphone.
The alarm on the product sounds and the
detailed data upload starts.
The RUNSENSE View screen is displayed when
the upload has completed.
Note:
❏ Try again if the communication fails.
❏ The uploaded detailed data item is deleted
from the Watch Data List.
❏ Repeat step 6 to 8 if you are uploading more
than one detailed data item from the Watch
Data List.
Smartphone User's Guide
Uploading and Checking Measurement Data
17
To Next Page
Loading...
