What to do if I cannot communicate with my Epson GPS watch?
If you are unable to communicate with your Epson GPS watch, try the following steps and tap Upload again: ensure the watch is charged, establish and maintain close communication with the watch, and verify that Bluetooth is enabled on your iOS device. If the issue persists, unpair and then re-pair the devices before tapping Upload again.
What to do if communication to my Epson Runsense SF-710 GPS watch was cut off?
If communication to your Epson GPS watch has been cut off, try the following and tap the menu item again: Charge the watch, establish communication with the watch and keep it nearby, and ensure Bluetooth is turned on in iOS settings. If the problem continues, unpair and pair the devices again.
General| GPS | Yes |
|---|---|
| Battery Life (GPS mode) | up to 20 hours |
| Connectivity | USB |
| Altimeter | Yes |
| Bluetooth | No |
| Stride Sensor | Yes |
| Display | LCD, monochrome |
| Heart Rate Monitor | Yes |
To Next Page
