Setting Up the Projector 29
Playing Sound Through the Projector
The projector has a built-in speaker with a maximum output of 1 W.
You can play sound from your video equipment through the
projector’s speaker if your video device has an audio output port.
For RCA-Style Audio Output Ports
Most video devices have an RCA-style audio output port. In this case,
use a commercially available RCA-style audio cable to connect the
projector to your video source:
1. Connect the red and white plugs on one end of the audio cable to
the
L-Audio-R jacks on the projector.
2. Connect the red and white plugs on the other end of the audio
cable to the corresponding color-coded audio output port on your
video source.
If you don’t need to make any other connections, you can plug in
your projector and turn it on. See page 32 for instructions.
Connect audio adapter
red and white plugs
Downloaded From projector-manual.com Epson Manuals
To Next Page
Loading...
