48 Using the Remote Control
Changing the Image’s Aspect Ratio
If you’re projecting a widescreen format image, you can use the
Aspect button on the remote control to change the aspect ratio.
Follow these steps:
1. Press the
Aspect button once to change the aspect ratio to 16:9
for widescreen format.
2. Press it again to return to 4:3 aspect ratio.
Changing Presentation Slides
You can use the remote control to click through slideshow-style
presentations (such as PowerPoint) from up to 20 feet away. This
gives you more flexibility, since you don’t need to stand near your
computer to change slides.
To change slides with the remote control, make sure you have
connected your computer to the projector with a USB cable as
described on page 21.
To advance slides in a PowerPoint presentation in Slide Show mode,
press the
Page up button on the remote control. Press the Page
down
button to go back a slide.
note
You must be projecting
component, composite, or
S-Video images to change
the aspect ratio.
You can also change the
aspect ratio using the
projector’s Signal menu. See
page 58 for details.
Downloaded From projector-manual.com Epson Manuals
To Next Page
Loading...
