Epson SC-T3100 Series User Manual

C
Touch Copy on the Home screen.
D
In Basic Settings, do the settings for Color,
Quality, Density, and Reduce/Enlarge.
U “Copy Menu (SC-T3100M Series Only) ”
on page 164
If you are doing detailed settings, such as
Original Type, do the settings from Advanced.
U “Copy Menu (SC-T3100M Series Only) ”
on page 164
If you are using the optional carrier sheet, you
must do the following settings in Advanced.
❏ Specify a user defined size as the Original
Size.
❏ Set Top Offset to 19 mm.
E
Touch the numeric value for the number of
prints and then enter the number of prints in
the keypad screen.
F
Press the Copy button to start scanning the
document.
While scanning, hold the original with both
hands so that it does not skew.
G
Remove the original when scanning is complete.
While holding the original, press the OK
button on the screen, and then remove the
original.
Printing starts when the original has been
completely removed.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Copying (SC-T3100M Series only)
104

Epson SC-T3100 Series Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)
Maximum Print Width	24 inches
Operating System Compatibility	Windows, macOS
Memory	1 GB
Print Technology	PrecisionCore MicroTFP printhead
Ink Type	UltraChrome XD
Connectivity	Ethernet
Media Handling	Roll paper, Sheet paper
Print Speed	34 seconds per A1/D-sized print
Paper Size	Up to A1
Power Consumption	Approximately 28 W (operating)
Dimensions	970 x 245 x 577 mm (Width x Depth x Height)
Media Types	Plain paper, Bond paper, Coated paper