Epson SC-T3100 Series User Manual

Copying or Scanning Problems
(SC-T3100M Series Only)
Lines Appear on Scanned or Copied
Documents
Follow the steps below to clean the inside of the
scanner. Dust or dirt that is stuck to the rollers or the
scanner's glass surface may cause unwanted lines or
marks on copy results and scanned images.
If the rollers or the scanner's glass surface is very dirty,
use the optional cleaning kit. Add a small amount of
cleaner to the cleaning cloth and wipe off the dirt.
U “Options and Consumable Products” on
page 205
Caution:
When opening and closing the scanner cover, keep
your hands away from the joint between the cover
and the printer.
If your fingers or hands get caught, it could cause
an injury.
c
Important:
❏ Do not use volatile chemicals, such as alcohol
or paint thinners. Deformation or
discoloration could occur.
❏ Do not apply liquids to or directly spray
lubricant on the scanner. Otherwise the
equipment and circuits may become
damaged, so the printer may not operate
correctly.
A
Open the scanner cover.
B
Using a soft cloth, wipe off any dust, dirt, or
paper particles (resembles white powder).
Thoroughly wipe the area shown in blue in the
illustration below.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Problem Solver
200

Epson SC-T3100 Series Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)
Maximum Print Width	24 inches
Operating System Compatibility	Windows, macOS
Memory	1 GB
Print Technology	PrecisionCore MicroTFP printhead
Ink Type	UltraChrome XD
Connectivity	Ethernet
Media Handling	Roll paper, Sheet paper
Print Speed	34 seconds per A1/D-sized print
Paper Size	Up to A1
Power Consumption	Approximately 28 W (operating)
Dimensions	970 x 245 x 577 mm (Width x Depth x Height)
Media Types	Plain paper, Bond paper, Coated paper