Epson SC-T3100 Series User Manual

C
Load paper in the auto sheet feeder with the
printable side facing you.
Align the paper edges before loading.
c
Important:
Insert all paper in portrait orientation.
Inserting paper in landscape orientation may
cause a decline in print quality.
D
Align the edge guides with the edges of the paper.
If the edge guides are too far from the edges of
the paper, the paper may be fed at an angle
which can cause skew errors and paper jams.
E
On the displayed screen, set the paper type and
size that match the loaded paper.
Not setting the appropriate paper type will
cause print quality trouble. See the following
for more details on the paper types and sizes.
U “For Auto Sheet Feeder/Cut Sheet(1
sheet)” on page 43
Removing paper from the auto
sheet feeder
A
Move the edge guides away from the paper and
remove the paper.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Loading and Setting the Paper
37

Epson SC-T3100 Series Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)
Maximum Print Width	24 inches
Operating System Compatibility	Windows, macOS
Memory	1 GB
Print Technology	PrecisionCore MicroTFP printhead
Ink Type	UltraChrome XD
Connectivity	Ethernet
Media Handling	Roll paper, Sheet paper
Print Speed	34 seconds per A1/D-sized print
Paper Size	Up to A1
Power Consumption	Approximately 28 W (operating)
Dimensions	970 x 245 x 577 mm (Width x Depth x Height)
Media Types	Plain paper, Bond paper, Coated paper