Supported Commercially Available Paper
This printer supports the following paper specifications for non-Epson media.
c
Important:
❏ Do not use paper that is wrinkled, scuffed, torn, or dirty.
❏ Commercially available paper corresponding to the paper types in the table can be loaded in and fed
through the printer as long as they meet the following specifications, however Epson cannot guarantee
the print quality.
❏ Commercially available paper types not in the table can be loaded in the printer as long as they meet the
following specifications, however Epson cannot guarantee the feed and print quality.
Roll Paper
Paper type
Plain paper, coated paper, photo paper, tracing paper, matte film, blueprint paper
*
Roll core size 2 inches
Roll paper outer diameter Up to 110 mm
Paper width SC-T5100 Series/SC-T5100N Series: 329 to 914 mm (36 inches)
SC-T3100M Series/SC-T3100 Series/SC-T3100N Series/SC-T2100 Series: 329 to 610 mm
(24 inches)
Paper thickness 0.05 to 0.21 mm
Roll weight 3 kg or less
Cut sheets (Auto sheet feeder)
Media Type
Plain paper, coated paper, photo paper, blueprint paper
*
Paper Size A4 to A3
Paper thickness 0.12 to 0.27 mm
You can load up to 50 sheets of plain paper in the auto sheet feeder, or up to 5 sheets of other paper types.
However, depending on the thickness of the paper, feeding may fail even if you load less than the number of sheets
mentioned above. In this situation, try loading fewer sheets of paper.
Cut Sheet (1 sheet)
Paper type
Plain paper, coated paper, photo paper, tracing paper, matte film, blueprint paper
*
Paper width SC-T5100 Series/SC-T5100N Series: 210 to 914 mm (36 inches)
SC-T3100M Series/SC-T3100 Series/SC-T3100N Series/SC-T2100 Series: 210 to 610 mm
(24 inches)
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Appendix
211
To Next Page
Loading...
Need help?
General
