Epson SC-T3100 Series User Manual

Settings item Settings value Explanation
Oversize The position at which the margin is added depends on the base
output size setting, as shown below.
❏ When set to Auto
Adds the value selected for page margin (area of
in the
following illustration) outside the hard clip area of the PS
command of the data (area of
in the following illustration).
❏ When set to a standard size or user defined size
Adds the value selected for page margin (area of
in the
following illustration) outside the size selected for base output
size (area of
in the following illustration). With the actual
output size, the margin section becomes larger than the
selected size (the area of
in the following illustration).
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Using the Menu
144

Epson SC-T3100 Series Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)
Maximum Print Width	24 inches
Operating System Compatibility	Windows, macOS
Memory	1 GB
Print Technology	PrecisionCore MicroTFP printhead
Ink Type	UltraChrome XD
Connectivity	Ethernet
Media Handling	Roll paper, Sheet paper
Print Speed	34 seconds per A1/D-sized print
Paper Size	Up to A1
Power Consumption	Approximately 28 W (operating)
Dimensions	970 x 245 x 577 mm (Width x Depth x Height)
Media Types	Plain paper, Bond paper, Coated paper