If the desired size is not available in the
pull-down menu of the Change Paper Size
dialog box, click Custom Paper Size... and
then set and save a custom size.
U “Printing at Non-Standard Sizes” on
page 66
E
Set Output Size.
To enlarge or reduce the size, select from the
pull-down menu below the Document Size.
See the following for more details on
enlargement settings.
U “Enlargements and Horizontal and
Vertical Banners” on page 61
F
Select Source and check the roll paper width
and media type.
Select from Roll Paper, Auto Sheet Feeder, or
Sheet. If you select a paper source for which
paper is not loaded in the printer,
appears.
For Roll Paper Width (Paper Size for cut
sheets) and Media Type, the settings configured
in the control panel of the printer are applied
automatically.
Note:
If the paper is loaded or changed after opening
the printer driver's dialog box, the paper size and
paper type settings configured on the printer will
not be applied. In this case, click the Acquire Info
button to apply the settings.
G
Select Select Target in Print Quality.
Choose an option according to the type of
document and how it will be used.
To set the color correction method or color
balance in detail to match your preferences,
clear the Simple Settings check box. See the
following for more details.
U “Correct color and print” on page 70
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Printing with the Printer Driver from Your Computer
49
To Next Page
Loading...
Need help?
General
