Epson SC-T3100 Series User Manual

B
Display the Basic Settings screen for the printer
driver, and then select Auto Sheet Feeder as
the Source.
U “Basic Operating Procedures (Windows)”
on page 48
C
Display the Layout tab of the printer driver,
and then select 2-sided printing.
Note:
❏ Click Binding Settings to set the Binding
Edge and Binding Margin. Depending on
the software you are using, the width of the
margin you set and the actual print results
may differ, we therefore recommended that
you perform a test print first.
❏ Select Folded Booklet to print as a booklet.
In the following example, when the paper is
folded in two, the inner pages (pages 2, 3, 6,
7, 10, and 11) are printed first.
D
Check other settings, and then start printing.
E
When you have finished printing the odd pages
and the instructions screen is displayed, follow
the on-screen instructions to re-load the paper,
and then click Resume.
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Printing with the Printer Driver from Your Computer
83

Epson SC-T3100 Series Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)
Maximum Print Width	24 inches
Operating System Compatibility	Windows, macOS
Memory	1 GB
Print Technology	PrecisionCore MicroTFP printhead
Ink Type	UltraChrome XD
Connectivity	Ethernet
Media Handling	Roll paper, Sheet paper
Print Speed	34 seconds per A1/D-sized print
Paper Size	Up to A1
Power Consumption	Approximately 28 W (operating)
Dimensions	970 x 245 x 577 mm (Width x Depth x Height)
Media Types	Plain paper, Bond paper, Coated paper