D
Use a soft cloth to remove any dust or dirt from
the platen.
Thoroughly wipe the area shown in blue in the
illustration below. To avoid spreading the dirt,
wipe from the inside to the outside.
For stubborn dirt, clean it using a soft cloth that
has been dampened with a small amount of
neutral detergent and then thoroughly wrung
out. Then, dry off the inside of the printer with a
dry, soft cloth.
E
If any paper particles (resemble white powder)
have accumulated in the holes shown in the
illustration below, use a pointed object such as a
toothpick to push them in.
F
Remove paper particles and dust around the
outer edges with commercially available cotton
swabs.
G
After cleaning, close the front cover.
Replacing the pads for borderless printing
Obtain the Borderless Replacement Pad Kit for this
printer and then replace the pads for borderless
printing.
U “Options and Consumable Products” on
page 218
When replacing the pads for borderless printing,
replace only the ones at the places where soiling occurs
on the paper back side. There is no need to replace all of
the pads for borderless printing.
You can see the procedure in a video on YouTube.
Epson Video Manuals
A
Turn the printer off and make sure that nothing
is displayed on the screen, and then unplug the
power cable from the outlet.
B
Leave the printer for a minute after removing the
power plug.
C
Open the front cover.
SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Problem Solver
205
To Next Page
Loading...
Need help?
General