Need help?Do you have a question about the Epson SG-WRITERII and is the answer not in the manual?
General| Brand | Epson |
|---|---|
| Model | SG-WRITERII |
| Category | Motherboard |
| Language | English |
Read instructions carefully and use correctly for safe operation.
Explanation of WARNING and CAUTION symbols indicating hazard levels.
Critical warnings regarding product operation, hazards, and prohibited actions.
Avoid inserting objects or liquid; disconnect USB and contact dealer if liquid enters.
Avoid unstable surfaces, dust, humidity, and heavy objects; disconnect USB when not in use.
Follow national and local regulations for product disposal.
Lists the SG-WRITERII unit and associated documents for download.
Specifies PC requirements (OS, CPU, Memory) and USB cable.
Details the WinUSBDriver folder structure for different Windows versions.
Step-by-step guide to install the USB driver on Windows 10, 7, or Vista.
Step-by-step guide to install the USB driver on Windows XP, including WHQL warning.
Steps to remove the driver via Control Panel.
Steps to remove the driver using Device Manager.
Lists the executable and library files for the SG-Writer software.
Procedure for copying files, connecting the device, and launching the installer.
Specifies the need for .NET Framework 4 and provides a download link.
Detailed steps for programming, including parameter entry and execution.
Instructions on setting the device in the socket and static precautions.
Showcases successful and error messages during the 'Write' operation.
Steps to set the device and execute the 'CheckDevice' function.
Describes how Order Code or Blank Sample messages appear.
Configures Model, Frequency, OE Polarity, Standby type, and I2C Address.
Steps for checking parameters, writing, and handling the device post-operation.
Instructions to set the device and execute the 'Check' button.
Describes messages displayed for programmed settings or blank devices.
Configures Device, Package, Frequency, Function, HTC, and Rank.
Steps for calculating, writing, testing, and interpreting results (O/x marks).
Instructions for setting the product in the socket and static electricity precautions.
Explains that this mode allows calculations and frequency writability checks.
Notes that write/measurement operations require exiting and relaunching the software.
Guide to selecting the correct IC package type for calculations.
Details on inputting frequency and selecting OE terminal function.
Explanation of HTC (Voltage/Output) and Rank (Accuracy) selections.
How to use the button for calculating values and displaying Fcalc/ppm.
Information on when the Writer button is enabled or disabled.
Explains the message for unwritable frequencies and how to proceed.
Details the 'Write & Test' function for writing and performing function tests.
Describes the 'Monitor' button for checking the device after writing.
Covers User Levels, Engineer Name, and Version information.
Explains the 'Function Check' display for test results.
Description of the USB connector for connecting to PC and USB cable.
Details about the socket for installing SG8xxx products and lever operation.
Table of pin assignments and operating conditions (voltage, temperature).
Lists various error messages, their content, and potential causes.
Notes on manual changes, frequency calculation guarantees, and disassembly.
Covers mass production approval, reprinting restrictions, and reference usage.
Information on strategic goods, export permits, and numeric value display.
Illustrations showing various IC socket types and their part numbers.
To Next Page