Epson Stylus 1500 - Loading Single Sheets Manually

Loading Single Sheets Manually
You can load single sheets of paper from the manual feed slot
without removing the paper supply from the sheet feeder. This
allows you to print single sheets of labels or manually feed
envelopes, for example. The slot can accommodate single
sheets of paper from 6.3 inches (160 mm) to 17.0 inches
(432 mm) wide.
Note:
When you load paper manually, you can adjust the loading position
using micro adjust mode if printing appears too high or low on the
page. See “Adjusting the Loading Position” on page 1-28.
Follow these steps to load a single sheet in the manual feed
slot:
1. Turn on the printer. Make sure that the paper-release lever
is set to the single-sheet position.
Note:
If a sheet of paper is in the manual feed slot before you turn on the
printer, the paper is ejected with nothing printed.
EPSON AMERICA, INC.
Documentation Department
20770 Madrona Avenue, Torrance, CA 90503
(310) 782-0770
TITLE

DATE

DRAWN BY

LM-9.EPS

9/7/95

B. Levert
Paper Handling
1-11