1-26
26 | Setting Up the Printer
9. Do one of the following:
• If you are finished installing software, click Exit.
•
If you installed the optional EpsonNet print server card,
double-click
Install EpsonNet Config. Enter your password and
follow the on-screen instructions. You can use EpsonNet Config to
configure your printer for network use.
When you see the prompt, click
Restart.
Remove the printer software CD-ROM and follow the instructions below
for Mac OS X 10.4 or on page 28 for Mac OS X 10.3.
Adding the Printer in Mac OS X 10.4.x
1. Open the Apple menu, select System Preferences, then open the
Print & Fax Utility. Or, go to Hard Drive > Applications > Utilities >
Printer Setup Utility.
Click here to add
your printer
sp4800Guide.book Page 26 Tuesday, March 7, 2006 3:49 PM
To Next Page
Loading...
