When you’re done printing, you may need to break the Bluetooth connection from
the host computer to let other people use the printer. See the documentation for
your Bluetooth device for details.
If you’re having problems printing, see if there is an updated driver for your
printer on EPSON’s support site (http://support.epson.com). You can also try
printing with the generic ESC/P 2 driver in your Windows software. See your
Windows documentation for details.
If you cancel a job while it’s printing, you may need to turn
your printer off and then on again, and then unplug the print
adapter and plug it back in.
20
To Next Page
Loading...
