16
Installing Printer Software for Windows Me
or 98
If you’re using the included USB-to-parallel cable, make sure
you install the software before connecting the cable to your
computer. The printer will work correctly with the
USB-to-parallel cable; however, you will not be able to use
EPSON Status Monitor to verify your Media Type setting,
paper supply, or ink levels.
Follow these steps:
1. Make sure your printer is turned off, then turn on your
computer.
2. Insert the printer software CD-ROM in your drive. The
installer starts automatically. If it doesn’t start, double-click
My Computer or click Start > My Computer. Then
double-click your CD-ROM icon.
You see this window:
Note:
If you’ve installed a
FireWire or Ethernet
card, you may see
additional screens as
Windows installs the
drivers for your card.
Quicksetup.fm Page 16 Friday, May 2, 2003 3:22 PM
To Next Page
Loading...
