12
Install the Printer Software
Follow the steps below (for Macintosh) or on page 14 (for
Windows) to install your printer software.
If you’re printing on a network, see Chapter 4 of your User’s
Guide for additional installation instructions.
Installing the Printer Software for Macintosh
After connecting the printer to your Macintosh, you need to
install the printer driver and utilities included on your printer
software CD-ROM. Follow these steps:
1. Turn on your Macintosh and your printer.
2. Insert the printer software CD-ROM in your drive.
3. If necessary, double-click the
EPSON CD-ROM to open
its window. Then double-click the
EPSON icon.
4. Double-click
Install Printer Driver for EPSON Stylus
Color 3000
.
Quicksetup.fm Page 12 Friday, May 2, 2003 3:22 PM
To Next Page
Loading...
