5
Instructions for Ethernet Connection
1.
At the EPSON Printer Utility Setup screen highlight your printer then click OK. Next, you will see the progress bar
followed by the Windows Logo verification screen. Click on
Continue Anyway
option to continue.
2. At this point DO NOT POWER On your printer and at the EPSON Printer Utility Setup screen click on
Stop searching
button to continue with the installation. Next, you will see the progress bar followed by the Windows Logo verification
screen. Select Continue Anyway option.
3. On the next screen your will be notified that the printer has been set to LPT1, click on OK to finish the driver installation.
To Next Page
Loading...
