Epson Stylus CX3800 Series
2 - Epson Stylus CX3800 Series 6/05
Print direction Bidirectional minimum distance
printing with logic seeking
Input buffer 64 KB
Ink Cartridges
Color Cyan, magenta, yellow, black
Cartridge life 6 months at 77 °F (25 °C)
after opening the package
Temperature Storage: –4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Freezing*: 3.2 °F (–16 °C)
*Ink thaws and is usable after approximately 3 hours at 77 °F
(25 °C).
To ensure good results, use genuine Epson ink cartridges and
do not refill them. Other products may cause damage to your
printer not covered by Epson’s warranty.
Do not use an ink cartridge if the date on the package has
expired.
Paper
This section describes the specifications for single sheets and
envelopes.
Note:
Since the quality of any particular brand or type of paper may be
changed by the manufacturer at any time, Epson cannot guarantee
the quality of any non-Epson brand or type of paper. Always test a
sample of paper stock before purchasing large quantities or printing
large jobs.
Single sheets
Size A4 (8.3×11.7inches)
A5 (5.8 × 8.3 inches)
A6 (4.1 × 5.8 inches)
Letter (8.5×11inches)
Legal (8.5×14inches)
Half-letter (5.5 × 8.5 inches)
Executive (7.3 × 10.5 inches)
4×6inches
5×7inches
3.5×5inches
8×10 inches
User Defined up to 8.5 × 44 inches
Paper type Plain bond paper or special paper
distributed by Epson
Thickness 0.003 to 0.005 inch (0.08 to 0.13 mm)
Weight
(for plain bond paper) 17 lb (64 g/m²) to
24 lb (90 g/m²)
Envelopes
Size No. 10 (4.1 × 9.5 inches)
DL (4.3 × 8.7 inches)
C6 (4.5 × 6.4 inches)
132×220 mm
Paper type Plain bond paper
Thickness 0.016 to 0.02 inch (0.40 to 0.52 mm)
Weight 20 lb (75 g/m²) to 24 lb (90 g/m²)
Note:
Poor quality paper may reduce the print quality and cause paper jams
or other problems. If you have print quality problems, switch to a
higher grade paper.
Do not load curled or folded paper.
Use paper only under these conditions:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 40 to 60% RH
Printable Area
Single sheets or cards
Envelopes
Note:
Always load paper into the sheet feeder with the short edge first.
Load envelopes flap edge left with the flap side down.
A: The minimum top margin is 0.12” (3.0 mm).
B-L: The minimum left margin is 0.12” (3.0 mm).
B-R: The minimum right margin is 0.12” (3.0 mm).
C: The minimum bottom margin is 0.12” (3.0 mm).
D The minimum bottom margin is 0.79” (20 mm) for envelopes.
* When printing with the borderless feature, print quality may
decline in the expanded area. Before printing large jobs using
the borderless setting, print a single sheet to confirm quality.
A
C
B-L B-R
Normal
Borderless
To Next Page
Loading...
Need help?
General
