Epson Stylus CX5600 - Page 48

EPSON Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450 Revision A
TROUBLESHOOTING Troubleshooting 48
• Power on
•Anywhere
The Scanner Unit does not initialize
when the power is turned on.
Scanner FFC
1. Check if the Scanner FFC is connected to J5 on the Main
Board.
1. Connect the Scanner FFC to J5 on the Main
Board.
2. Check if the Scanner FFC is not damaged. 2. Replace the Scanner FFC with a new one.
• Power on
•Anywhere
The Scanner Unit does not initialize
when the power is turned on.
CIS Assy.
1. Check if the CIS Assy. is not damaged. 1. Replace the CIS Assy. with a new one.
Table 3-12. Check point for fatal error according to each phenomenon
Occurrence
timing
CR position
Detailed phenomenon
Defective
unit/part name
Check point Remedy
Scanner FFC
J5
CIS Assy.