Epson Stylus CX5600 - Page 98

EPSON Stylus CX4300/CX4400/CX5500/CX5600/DX4400/DX4450 Revision A
DISASSEMBLY/ASSEMBLY Scanner Section 98
 When installing the Scanner FFC to the Lower Scanner
Housing, secure it and the ferrite core with double-sided tapes
at the specified positions. (refer to Figure 4-99)
 When installing the CIS Carrier Assy., put the Scanner
Timing Belt through the slit of the CIS Carrier Assy. (refer to
Figure 4-98)
 When installing the CIS Assy. to the CIS Carrier Assy.,
connect the Scanner FFC and route the FFC under the tab of
the CIS Assy. (refer to Figure 4-97)
 When installing the CIS Assy. to the CIS Carrier Assy., match
the tab and the notch as shown below.
Figure 4-100. Installing CIS Assy. to CIS Carrier Assy.
A D J U S T M E N T
R E Q U I R E D
When the CIS Carrier Assy. is reassembled, perform the required
lubrication to the Guide Rail of the Lower Scanner Housing.
(Refer to Chapter 6 “ MAINTENANCE (p108)”)
Tab
Notch
CIS Carrier Assy.
CIS Assy.