12 Faxing Photos or Documents
Selecting Send/Receive
Settings
This product is set up to send and receive
faxes using the following default settings.
Setting and
Options
Description
Resolution Standard (default),
Fine, Photo
Sets the resolution when
reading documents.
Contrast ±0 (default), +4 to -4
Sets the contrast when
reading documents and
for print outs.
Auto
Reduction
On (default), Off
Indicates whether large
received faxes are
reduced in size to fit on
A4-size paper or printed
at their original size on
multiple sheets.
Last
Transmission
Report
Off, On Error (default),
On Send
Indicates whether or
when the product prints
a report for outgoing
faxes. Select Off to turn
off report printing, select
On Error to print reports
only when an error
occurs, or select On
Send to print reports for
every fax you send.
Dial Mode Tone (default), Pulse
This setting may not be
displayed depending on
the region.
Indicates the type of
phone system to which
you have connected the
product.
DRD All (default), Single,
Double, Triple, Double
& Triple
This option may be On
or Off depending on the
region.
Indicates the type of
answer ring pattern you
want to use to receive
faxes. You must have
set up your phone
system to use different
ring patterns to select an
option other than All (or
Off).
ECM On (default), Off
Indicates whether you
use Error Correction
Mode to automatically
request retransmission
of fax data that is
received with detected
errors.
V.34 On (default), Off
Indicates the speed at
which you transmit and
receive faxes.
On is 33.6 Kbps and Off
14.4 Kbps.
Rings to
Answer
1, 2, 3, 4, 5, 6, 7, 8, 9
The default value varies
by region. This setting
may not be displayed
depending on the
region.
Indicates the number of
rings that must occur
before the product
automatically receives a
fax.
Setting and
Options
Description
To Next Page
Loading...
