Epson Stylus Office T1110 - Page 111

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision A
Disassembly And Assembly Disassembling the Printer Mechanism 111
Confidential
4. Remove the Spacer from the EJ Roller Shaft.
5. Remove the guide pins on Left Bushing 8 from the Main Frame using tweezers,
and turn Left Bushing 8 toward you to align with the notches on the Main Frame.
Figure 4-121. Removing the Spacer and Rotating the Left Bushing 8
6. Slide the Front Paper EJ Roller to the left, and remove the Left Bushing 8 from the
Main Frame.
Figure 4-122. Removing the Left Bushing 8
7. Return the Carriage Unit to its home position.
8. Remove the C.B.S. M3 x 6 screw that secure the Left Front Frame.
9. Release the tab that secures the Front Paper Guide from the Main Frame and slide
the Front Paper Guide to the left, and turn it until the front side faces up to remove
the Front Paper Guide together with the Paper EJ Roller.
Figure 4-123. Removing the Front Paper Guide and Paper EJ Rollers
Insert the spacer into the groove on the Front Paper EJ Roller.
Guide
pin
Spacer
Left Bushing 8
Notch
Groove
Front Paper EJ Roller
Tab
Paper EJ Rollers (Front side)
Front Paper Guide
Paper EJ Rollers (Back side)
2) C.B.S. M3x6
2) C.B.S. M3x6
(8±1 kgf.cm)
Left Front
Frame
www.printerwhy.net
高速行式打印机 http://www.lineprinter.com.cn/
_______________________________________________________________________________________
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/ 打印机驱动下载 http://www.printerwhy.com/