Epson Stylus Photo 2100 - Page 164

EPSON Stylus PHOTO 2100/2200 Revision B
DISASSEMBLY AND ASSEMBLY Disassembly 164
4.2.12.5 Removing the PW Sensor
1. Remove the Carriage Unit. (Refer to 4.2.9.)
2. Release the hook of the PW Sensor Cover located on the Carriage Unit bottom,
and slide and remove the PW Sensor Cover together with PW Sensor.
Figure 4-97. Removing the PW Sensor Cover
3. Disconnect the FFC connected to the PW Sensor.
4. Remove the PW Sensor from the PW Sensor Cover.
Figure 4-98. Removing the PW Sensor
PW Sensor Cover
Hook
Carriage Unit bottom
" When reinstalling the PW Sensor, hitch it on the hook of the PW
Sensor Cover.
Refer to Figure 4-97, "Removing the PW Sensor Cover".
" Insert the FFC into the PW Sensor securely.
Refer to Figure 4-99, "Removing the PW Sensor".
Figure 4-99. Removing the PW Sensor
PW Sensor
PW Sensor Cover
PW Sensor
FFCPW Sensor Cover