#"$
You see a spooling error message (Windows)
You see a memory error message (Macintosh)
The “SP 750 cannot be used” message appears (Macintosh
)
Possible cause Solution
Your hard drive is full. Delete unnecessary files to make room for print job files on the drive.
Your computer doesn’t
have enough memory
to print your file.
Try the following:
◗ Close all other open applications, including screen savers and virus
scan programs.
◗ Reduce the resolution of your image.
◗ Select fewer colors or a lower resolution for your display or monitor.
◗ Add more memory to your computer.
Possible cause Solution
You need to increase
the memory allocated
for your application,
EPSON Monitor3, or
both.
Choose Get Info from the File menu when the application is active or
when EPSON Monitor3 is selected and increase the memory allocation.
See Using Monitor3
for more information.
If that doesn’t work, turn off background printing in the Chooser or in your
printer software; see Using Background Printing on the Macintosh
for
instructions. (You won’t be able to use Monitor3.)
Possible cause Solutions
The printer software
has been corrupted.
Remove and reinstall the printer software as described in the
Printer
Basics
book. Then, in the Extensions Manager, disable Quick Draw GX,
enable EPSON Monitor3 and SP 750, and restart.
To Next Page
Loading...
