#"$
The image is inverted as if viewed in a mirror
Printing is stalled. In Windows, delete the stalled print jobs in Spool Manager; see Using
the Spool Manager for instructions. In Windows NT, uninstall the
EPSON Printer Port. Click Start, point to Programs, EPSON Printers,
and select EPSON Printer Port Uninstall.
On a Macintosh, select the stalled print jobs in Monitor3 (see Using
Monitor3) or open the Extensions folder, EPSON folder, and Spool
folder, and delete any queued files.
The interface cable is
loose.
Turn off your printer and computer, then connect the cable securely.
Make sure the cable meets the printer’s specifications, as described in
Windows System Requirements
and Macintosh System Requirements.
Your video driver may
be conflicting with the
EPSON printer driver.
Change to a standard VGA driver (see your computer or video card
documentation for instructions) and try printing again. If your printout is
correct, your video driver is interfering with the printer driver. Contact
your computer or video card manufacturer for an updated driver.
Possible cause Solution
You used a Flip
Horizontal option.
Turn off the Flip Horizontal or mirror setting in your application software
or the printer software. See Customizing Print Quality and Special
Effects for instructions.
Possible cause Solution
To Next Page
Loading...
