EPSON Stylus PHOTO 810/820 Revision A
PRODUCT DESCRIPTION INTERFACE 20
NOTE:
In/Out refers to the direction of signal flow from the printer’s point of
view.
35 +5V - Out Pulled up to +5V via 3.3K ohm resistor.
17 Chassis GND - - Chassis GND.
16,33,
19-30
GND - - Signal GND.
15,34 NC - - Not connected.
Table 1-12. Connector pin assignment and signals (continued)
Pin No. Signal name
Return
GND pin
In/Out Functional description
To Next Page
Loading...
