Epson Stylus Photo 820 - Panel Functions; Printer Condition and Panel Status

EPSON Stylus PHOTO 810/820 Revision A
PRODUCT DESCRIPTION PANEL CONTROL 25
1.4.2 Panel Functions
* This function is not available in printing status.
*1 Not described in the user's manual.
1.4.3 Printer Condition and Panel Status
" - " : Indicator status don't change.
" A -> B " :A is a indicator condition when carriage is in Home Position.
B is a indicator condition in Ink exchange sequence.
*1: refer to 1.4.4 "Error Status"or detailed information.
Blink : On 0.5sec + Off 0.5sec
Blink2 : On 0.2sec + Off 0.2sec + On 0.2sec + Off 0.4sec
Table 1-15. Panel functions
Switch Function
Error reset SW
• Loads or Ejects the Paper (Pushing within 3seconds).
• Starts the Cleaning of head (Pushing for 3seconds).
• When carriage is on the Ink Cartridge change position, return
carriage from Ink cartridge change position.
Ink cartridge
exchange SW
• Starts the Ink Cartridge change sequence. *
Table 1-16. Panel functions with power on
Switch Function
Error reset SW
• Start status printings.
Ink cartridge
exchange SW
• Selects IEEE 1284.4 mode for parallel I/F. *1
Table 1-17. Printer condition and LED status
Printer status
Indicators
Priority
Power Error
Power ON condition On - 10
Ink sequence Blink - 6
Ink cartridge change mode Blink - 5
Data processing Blink - 9
Paper out *1 - On 4
Paper jam condition *1 - On 3
Ink end (Black) *1 - On -> Blink 8
Ink level low (Black) - Blink-> Blink 8
Ink end (Color) *1 - On -> Blink2 8
Ink level low (Color) - Blink-> Blink2 8
Ink end (Black and Color) - On -> On 8
No ink cartridge
(Black and Color) *1
- On 7
Maintenance request
(Ink overflow counter
error) *1
Alt Blink Alt Blink 2
Fatal error *1 Off On 1
Special setting Blink2 Blink2 -