Epson Stylus Photo 820 - Page 86

EPSON Stylus PHOTO 810/820 Revision A
Disassembly and Assembly Disassembly 86
3. Move the protrusion of the Upper housing, which contacts USB interface, to the
right side slightly by using the precision screwdriver (-).
Figure 4-4. Protrusion position of the Upper housing
CAUTION

Do not damage the protrusion by the precision screwdriver (-).

When assembling the Upper housing to the printer,

Make sure that the lower metal fittings for locking the
Parallel interface is on the Housing.

Make sure that seven hooks of the Upper housing is correctly
fixed to the Lower housing.

Make sure that there is not the clearance between the Upper
housing and the Lower housing.
USB interface