Epson Stylus Photo 895 - Installing in Macintosh

R4C706Setup Guide
Rev_D
A5 size SETUP.FM
5/24/01
R
Proof Sign-off:
T.Kubota CRE Nakano
N.Nomoto
editorname
Accessing EPSON Status Monitor 3
After installing the printer software, you need to access EPSON Status
Monitor 3 to verify that the printer software has been installed correctly.
Follow the instructions below.
1. From the Start menu, select Settings then click Printers.
2. Right-click the EPSON Stylus Photo 895 icon, then click Properties.
3. Click the Utility tab, then click EPSON Status Monitor 3.
4. If the following window appears,
your printer software has been
installed correctly.
Installing in Macintosh
Follow the instructions in this section to install the printer software,
select your printer in the Chooser.
c
Caution:
Turn off all virus protection programs before you install the printer
software.
Installing the printer software and photo print software
Follow these steps to install your printer software and photo print
software (EPSON PhotoQuicker, EPSON PhotoStarter, EPSON
CardMonitor).
1. Turn on your Macintosh and insert the software CD in the CD-ROM
drive.
2. Double-click the Installer icon inside the EPSON folder that
automatically opens.