EasyManua.ls Logo

Epson Stylus Photo 925 - Loading Roll Paper

Epson Stylus Photo 925
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
Provide ample space in front of the printer for the paper to
eject fully.
Make sure that the output tray is down and the output tray
extension is closed.
Check that the end of the paper is cut cleanly, perpendicular
to the long axis of the paper. If it is cut on a diagonal or not
cleanly, the paper may not feed smoothly or the print may
extend off the edge of the paper.
EPSON recommends using media distributed by EPSON to
ensure high-quality results.
See Loading Roll Paper on page 58 for how to set roll paper.
Loading Roll Paper
Follow the directions below to mount the roll paper holder and
load the following types of roll paper.
Photo Paper (100 mm × 8m)
Photo Paper (210 mm × 10 m)
Premium Glossy Photo Paper (100 mm × 8m)
Premium Glossy Photo Paper (127 mm × 8m)
Premium Glossy Photo Paper (210 mm × 10 m)
Premium Semigloss Photo Paper (100 mm × 8m)

Table of Contents

Other manuals for Epson Stylus Photo 925

Related product manuals