Epson Stylus Photo 925 - Printing Is too Slow; Paper Does Not Feed Correctly; Blank Pages Print; Printout Has Smears on the Bottom Edge

92
Printout Problems Not Related to Print Quality
If one of the following problems has occurred, try the solutions
listed for the problem.
❏ Blank pages print
❏ Printout has smears on the bottom edge
❏ Printing is too slow
Blank pages print
❏ Run the Head Cleaning utility to clear any clogged nozzles.
“Cleaning the Print Head” on page 79.
Printout has smears on the bottom edge
❏ If the paper is curled toward the printable side, flatten it or
curl it slightly in the opposite direction.
❏ Set the adjust lever to the
^ position.
Printing is too slow
❏ Make sure that the Media Type setting in the LCD panel is
correct.
Paper Does Not Feed Correctly
If one of the following problems has occurred, try the solution(s)
listed for that problem.