Quick Setup
Unpack the Printer
Here’s how to set up your new EPSON
®
Stylus Photo
printer . . .
Remove any packing material from the printer, as described on
the Notice Sheet in the box. Save all the packaging so you can
use it if you need to transport the printer later. You’ll find these
items inside:
4007082
Place the printer flat on a stable desk near a grounded outlet.
Leave plenty of room in back for the cables and enough room
in front for opening the output tray.
Do NOT put the printer:
◗ In an area with high temperature or humidity
◗ In direct sunlight or dusty conditions
◗ Near sources of heat or electromagnetic interference, such
as loudspeakers or cordless telephone base units.
Also, be sure to follow the Safety Instructions in the
Introduction of your User’s Guide.
○○ ○○○○○
black ink
cartridge
○○○○○○
○○○○○○
color ink
cartridge
paper
support
Quick setup Comoro 5/22/97, 10:18 AM1
To Next Page
Need help?
General