1. Lower the output tray and raise the printer cover.
2. Press the power button to turn on the printer. The power
light flashes, the and ink out lights come on, and the ink
cartridge holders move to the installation position.
3. Pull up the two ink cartridge clamps.
4. Open the ink cartridge packages. Remove the disposable
yellow portion of the tape seal on top.
Install the Ink Cartridges
color ink
cartridge
○○○○
black ink
cartridge
○○○
Caution:
You must remove the
tape seal from the top
of the cartridge or you
will permanently
damage it. Don’t
remove the tape seal
from the bottom or ink
will leak.
Quick setup Comoro 5/22/97, 10:18 AM3
To Next Page
Loading...
