20 Loading Paper
8. Open the printer cover and look down into the printer to make sure the paper is
loaded correctly. It should be straight and the leading edge of the paper should
not be visible.
If the paper isn’t loaded correctly, press the z roll paper button for 3 seconds to
back the paper out. Remove the paper, then press the ) paper button to clear the
paper out error. Reload the paper.
9. Before printing, select Manual - Roll as the Source setting (Windows) or
Manual - Roll as the paper source setting within the Paper Size menu
(Macintosh
®
) in your printer software (see page 28 for Windows or page 33 for
Macintosh).
Paper is loaded correctly If edge is visible, reload paper
To Next Page
Loading...
