Epson Stylus Photo R260 - Safety Approvals

Epson Stylus Photo R260
9/06 Epson Stylus Photo R260 - 3
Electrical
* Check the label on the back of the printer for its voltage.
Environmental
Temperature
Operation 50 to 95 °F (10 to 35 °C)
Storage –4 to 104 °F (–20 to 40 °C)
1 month at 104 °F (40 °C)
Humidity (without condensation)
Operation 20 to 80% RH
Storage 5 to 85% RH
Safety Approvals
Safety standards UL 60950-1
CAN/CSA-22.2 No.60950-1
EMC FCC part 15 Subpart B class B
CAN/CSA-CEI/IEC CISPR 22 Class B
Paper
Printable area
* When you print with the borderless feature, print quality may
decline in the expanded area. Before printing large jobs using the
borderless setting, print a single sheet to confirm printout quality.
Note: Always load paper into the sheet feeder with the short edge
first. Load envelopes flap edge left with the flap side down.
Rated Voltage 100-120 V Model 220-240 V Model
Input voltage range* AC 90 to 132 V AC 198 to 264 V
Rated frequency range 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Rated current 0.6 A
(Max. 0.9 A)
0.3 A
(Max. 0.5 A)
Power
consumption
ISO/IEC10561
Letter Pattern
Approx. 12 W
Sleep mode Approx. 1.1 W Approx. 1.2 W
Power off
mode
Approx. 0.2 W Approx. 0.4 W
Paper Type Specifications
Single sheets Plain bond
paper or special
paper
distributed by
Epson
Thickness: 0.003 to 0.004 inch (0.08
to 0.11 mm) for plain bond paper
Weight: 17 lb to 24 lb (64 g/m² to 90
g/m²) for plain bond paper
Envelopes Plain bond
paper
Weight: 20 lb to 24 lb (75 g/m² to 90
g/m²)
A The minimum top margin is 0.12 inches (3.0 mm).
B-L The minimum left margin is 0.12 inches (3.0 mm).
B-R The minimum right margin is 0.12 inches (3.0 mm).
C The minimum bottom margin is 0.12 inches (3.0 mm).
D-L The minimum left margin is 0.20 inches (5.0 mm).
D-R The minimum right margin is 0.20 inches (5.0 mm).
E The minimum bottom margin is 0.78 inches (20.0 mm).
Normal Borderless*
Envelopes