Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50 Revision C
Chapter 1 Product Description 1.4 General Specifications 17
Confidential
1.4 General Specifications
1.4.1 Electrical Specifications
Primary power input
Note : If the printer is not operated for more than three minutes, the printer shifts into the
standby mode and reduces the current to the motor to conserve power.
1.4.2 Environmental Conditions
Note *1: The combined Temperature and Humidity conditions must be within the blue-shaded
range in
Fig.1-3.
*2: No condensation
*3: Non-operating with unpacked.
*4: Must be less than 1 month under 40°C.
Figure 1-3. Temperature/Humidity Range
Table 1-11. Primary Power Specifications
Item 100-120V model 220-240V model
Rated power supply voltage 100 to 120 VAC 220 to 240 VAC
Input voltage range 90 to 132 VAC 198 to 264 VAC
Rated current 0.6 A (max. 1.0 A) 0.3 A (max. 0.5 A)
Rated frequency 50 to 60 Hz
Input frequency range 49.5 to 60.5 Hz
Insulation resistance 3000 V (for one minute)
Energy conservation
International Energy Star Program
compliant
Power
consumpt
ion
Printing
(ISO10561 Letter
Pattern)
Epson Stylus
Photo R280/
R285/R290
Approx. 12 W
Epson Artisan 50/
Epson Stylus
Photo T50/T59/
T60/P50
Approx. 13 W
Sleep mode Approx. 1.0 W Approx. 1.2 W
Standby mode
(power-off) Approx. 0.2 W Approx. 0.3 W
Table 1-12. Environmental Conditions
Condition Temperature
*1
Humidity
*1,2
Shock Vibration
Operating
10 to 35°C
(50 to 95°F)
20
to 80%
1G
(1 msec or less)
0.15G,
10 to 55Hz
Storage*
3
(unpacked)
-20 to 40°C*
4
(-4°F to 104°F)
5
to 85%
2G
(2 msec or less)
0.50G,
10 to 55Hz
When returning the repaired printer to the customer, make sure
the Printhead is covered with the cap and the ink cartridge is
installed.
If the Printhead is not covered with the cap when the printer is
off, turn on the printer with the ink cartridge installed, make
sure the Printhead is covered with the cap, and then turn the
printer off.
To Next Page
Loading...
