Epson Stylus Photo R290 - Page 63

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50 Revision C
Chapter 4 Disassembly/Assembly 4.2.4 Upper Housing (Removing Exterior Parts/Components) 63
Confidential
2. Slide the Front Housing in the direction of the arrow and remove the Front
Housing from the Upper Housing.
Figure 4-15. Removing the Front Housing
When installing the Upper Housing, be careful of the following:
 Do not pinch the cables.
 Tighten the screws in the order given in Fig.4-14 (p.62).
 Match the ribs of the Upper Housing shown in Fig.4-14 (p.62)
with the grooves of the Lower Housing.
 As shown in Fig.4-16, match the A part of the Front Housing
with the screw box of the Lower Housing.
Figure 4-16. Installing Upper Housing
[Rear Side]
Ribs
Front Housing
Grooves
Front Housing
Screw box of
Lower Housing
A part of Front
Housing