30
Printing on CDs and DVDs
Printing on CDs and DVDs
You can use your R3000 Series and the Epson Print CD software that came with it
to print label designs directly onto ink jet-printable CDs or DVDs. To prevent
errors, you should burn files, music, or video onto your CD or DVD before
printing.
Follow the steps in these sections:
■ “Loading a CD or DVD” on page 30
■ “Printing on a CD or DVD” on page 32
■ “Removing Your Printed CD/DVD” on page 34
Loading a CD or DVD
1. Turn on the printer.
2. Remove any roll paper or paper loaded in the sheet feeder. Close the rear
support if it’s open.
To Next Page
Loading...
