10 Handling a CD/DVD
Handling a CD/DVD
c Caution:
Store the CD/DVD tray in a flat place. A warped
or damaged CD/DVD tray may stop the printer
from operating normally.
Note:
❏ Make sure the data, music, or video is burned
on your ink jet printable CD/DVDs before you
print.
❏ Moisture on the printable surface may cause
smearing.
❏ The printed surface is easily smeared
immediately after printing.
❏ Be sure to let a CD/DVD dry completely
before using it or touching the printed surface.
❏ Do not allow the printed CD/DVD to dry in
direct sunlight.
❏ If the CD/DVD tray or the internal transparent
compartment are accidentally printed on,
immediately wipe off the ink.
❏ To print on 8-cm mini CDs, use the EPSON
Print CD included in the software CD-ROM.
See your online User's Guide.
Loading a CD/DVD
1. Close the output tray extension.
c Caution:
Make sure there is no paper on the output
tray.
2. Press L [CD Print] to move the CD/DVD
guide.
c Caution
❏ Do not press L [CD Print] while the printer
is operating.
❏ Do not touch the CD/DVD guide while the
printer is operating.
3. Place your CD/DVD on the tray.
4. Insert the tray into the CD/DVD guide.
c Caution:
Do not insert the tray while the printer is
operating, or you may damage the printer.
The label
surface up.
To Next Page
Loading...
