24 | Quick Installation Guide
4. Enter the Name (IP address) of the server and the New Device (printer
name). See the table on page 12 to get the name for your printer. Click
Add, then click OK.
5. Click
OK on the next two screens. Fiery Spooler launches.
Installing Fiery Downloader
1. On the User Software CD-ROM, double-click the
Fiery
Downloader
icon.
2. Read the license agreement, then click
Accept.
3. At the next screen, click
Install.
4. Click
Quit when the installation is complete.
Configuring the Fiery Downloader
1. Select Fiery Downloader on your hard disk drive.
2. Select the server and click
Connect.
Enter the server IP
address
Enter the device name
for your printer (listed
on page 12)
Click Add
Then click OK
To Next Page
Loading...
