Epson Stylus Pro 4880 - Page 11

9
English
5. Fan a stack of paper, and then tap it on a flat
surface to even the edges.
If the paper is curled, flatten it before you load
it. If it curls excessively and jams frequently,
stop using it.
6. Clean the inside of the tray to remove any
dust. Dust may decrease the printout quality.
7. Load the sheets with the printable side facing
down and the right edge of the paper resting
against the right side of the paper tray.
Note:
❏ Always set the paper’s short edge first.
❏ Make sure the sheets lie flat on the bottom of
the tray, and put the edge of the paper against
the right inner corner of the paper tray;
otherwise, printing may become misaligned.
❏ The loadable capacity of paper in the paper tray
differs depending on the media and its size.
The paper tray can hold up to 250-sheets of
17 lb or 64 g/m² plain paper. Do not load the
paper above the arrow mark on the inside
surface of the left edge guide.
For information on the loadable capacity of
Epson special media, see the following table.
* 50 sheets of paper can be set under the
following conditions (temperature is 15 to
23°C and humidity is 40 to 60%).
Epson special
media
Size Loadable
capacity in
the paper tray
Premium
Semigloss Photo
Paper
A4 100
Letter 100
A3 50
Super
A3/B
50
Premium Luster
Photo Paper
Letter 100
Super
A3/B
50
Singleweight
Matte Paper
Super
A3/B
100
A2 50
US C 50
Photo Quality Ink
Jet Paper
A4 200
Letter 200
A3 100
Super
A3/B
100
Epson Proofing
Paper White
Semimatte
Super
A3/B
1*
Archival
(Enhanced) Matte
Paper
A4 100
Letter 100
A3 50
Super
A3/B
50
A2 50
US C 50
Watercolor
Paper-Radiant
White
Super
A3/B
20