11
English
4. Adjust the length of the paper tray and the
paper tray cover according to the paper size.
If you do not extend them, the printout may
fall.
Note:
Make sure the roll paper support is not raised.
c
Caution:
Do not leave the paper in the printer for a long
period of time; its quality will deteriorate. We
recommend that you remove the paper from the
printer after printing.
Connecting the Printer with Your
Computer
Connect the printer and computer with a USB
cable or Ethernet cable. Use the following cables.
❏ USB cable
❏ 10BaseT or 100BaseTX Category 5 Shielded
twisted-pair cable
1. Make sure the printer is turned off.
2. Connect the cable to the printer, and plug the
other end of the USB cable to the computer or
the other end of the Ethernet cable to the
Ethernet hub.
USB connection:
Network connection:
Note:
When you connect both USB cable and Ethernet cable,
install the printer software from each computer
separately. You can connect both USB cable and
Ethernet cable to the printer at the same time.
To Next Page
Loading...
